fundamental & 3rd to 7th o/t please see table 1 100 w typ drive level dependency dld ? freq & esr 0.01, 0.1, 1, 10, 50, 100 mw steps insulation resistance table 1 esr and mode of oscillation frequency (mhz) esr ( ? ) max frequency (mhz) esr ( ? ) mode at fund 2.000 ~ 2.399 at fund 2.400 ~ 2.999 at fund 3.000 ~ 3.199 3rd overtone 3.200 ~ 3.499 3rd overtone 3.500 ~ 3.899 3rd overtone 3.900 ~ 4.099 5th overtone 4.100 ~ 5.999 7th overtone table 2 frequency stability vs operating temperature range issue: 9 scb date 20-11-2012 30 20 20 50 40 90 90 90 70 at fund at fund 60 at fund iso9001:2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, uk http://www.actcrystals.com please note that all parameters can not necessarily be specified in the same device 50 at fund 150 aging 1.8432 ~ 1.999 drive level load capacitance stability over temp range c 350 300 200 temp storage range equivalent series resistance shunt capacitance co tstg temp operating range dl max esr options available - please enquire dependent on cut & frequency cl please specify 7pf max -10~+60c,-20~+70c & -40~+85 8 ~ 55pf or sr -40c to +85c please specify please specify please see table 2 5ppm ~ 100ppm (30ppm std ) at fund at fund at fund at fund opr ? f/fo 10.000 ~ 12.999 3ppm / year max@25c fa 90 100 @ dc 100v 15v at fund mode 7.000 ~ 9.999 13.000 ~ 30.000 24.000 ~ 29.999 ir parameter frequency tolerance @25c frequency range specification please specify fo ? f/fo tel : 0044 (0)118 979 1238 fax : 0044 (0)118 979 1283 email : info@actcrystals.com please specify 1.8432mhz ~ 150mhz act hc49/u ( standard devices ) specification the act hc49u family is available in industry standard package and specifications. this series offers a broad range of frequencies and tolerances in both standard and industrial temperature ranges. housed in resistance welded cases the hc49u offers excellent aging characteristics. cost / performance ratios are extremely good for this family of devices and they offer reasonably high density mounting capability, where height isn't a restriction. low frequencies are also more readily available in this type of package. various optional packages and custom specifications are available - please see separate data sheet for act hc49/u ( custom options ) symbol condition customer to specify : frequency, frequency tolerance, temperature stability, operating temperature range, load capacitance & mode in line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice 500m ? min 6.000 ~ 6.999 30.000 ~ 65.000 60.000 ~ 99.999 90.000 ~ 120.000 120.000 ~ 150.000 -10 ~ +60c -20 ~ +70c -40 ~ +85c 10ppm 15ppm 20ppm 25ppm ? ? ? ? ? ? ? ? enquire ? ? ? ? ? ? ? ? ? 30ppm 50ppm stability temp
act hc49/u ( standard devices ) issue: 9 scb date 20-11-2012 for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, uk http://www.actcrystals.com in line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice iso9001:2000 registered 48.0000 4.1943 7.1591 11.2896 19.6608 36.0000 4.0960 7.0000 11.0592 18.4320 40.0000 4.0320 6.5539 11.0000 18.0000 32.0000 4.0000 6.5536 10.7520 17.7345 32.7680 3.9322 6.4000 10.2450 16.9344 29.4912 3.6864 6.1760 10.0000 16.3840 30.0000 3.6000 6.1440 9.8304 16.0000 28.2240 3.5795 6.0000 9.2160 15.0000 28.6364 3.2768 5.7143 9.0000 14.7456 2.8224 5.1200 3.0000 5.1850 8.6724 14.3182 8.1920 14.0000 24.0001 60.0000 24.5760 64.0000 27.0000 2.0974 5.0000 7.6800 13.0000 25.0000 2.4576 5.0688 8.0000 13.8750 22.1184 56.4480 1.8432 4.4336 2.0000 4.9152 7.3728 12.2880 7.3728 12.0000 20.0000 50.0000 tel : 0044 (0)118 979 1238 fax : 0044 (0)118 979 1283 email : info@actcrystals.com standard frequencies (mhz) package / packaging options with insulating washer cropped leads (3.5mm, 5mm, 7mm) tape and reel, see page 3
issue: 9 scb date 20-11-2012 http://www.actcrystals.com in line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice iso9001:2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, uk tel : 0044 (0)118 979 1238 fax : 0044 (0)118 979 1283 email : info@actcrystals.com
example : go 1 2 0 0 i k g l - pf (hc49/u) (12.000mhz ) (30ppm) (30ppm) (-20+70) (loose ) (rohs) a 5 e 10 a 3rd o/t f 15 f fundamental - pf g 20 e -10+60 go 8 i 30 std g -20+70 std jo 9 l 50 m -40+85 ko 10 mo 11 packaging oo 12 l = loose std zo 14 c =1k t&r po 15 f 10 ro 16 g 15 to 18 i 20 vo 20 j 25 aa 24 k 30 std ba 25 o 50 da 30 fa 33 ja 50 sr sr notes : 1) 2) 3) issue: 9 scb date 20-11-2012 frequencies below 10.000mhz are prefixed with a "0" (eg: 0800mhz = 8mhz.whereas 10.000mhz is 1000 and 100.00mhz is 10000) available stabilities iso9001 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, united kingdom http:www.actcrystals.com nb: it is important to suffix the above p/no with the full frequency required to give a complete p/no as illustrated below full example part number go1200ikgrofl-pf 12.00mhz tighter tolerances and stabilities, other operating temperature ranges and cl's may be available as semi custom devices. as each of these specification parameters impact on each other, it is not always possible to combine all options in one device. therefore, if a specification not catered for above is required, please contact us directly for the relevant part number code(s). act are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested aql requirements, non standard packaging or taping and reeling and custom marking. such devices would normally be allocated a custom specification part number which is wholly customer specific. ( moq dependent ) ( eg : a 12.00mhz custom acthc49/u device may have a part number such as go1200c- c1246-pf) mode rohs comp' examples 0983 = 9.8304mhz 1200 = 12.000mhz stability over operating temperature (oc) 9999 = 99.9999mhz 10000 = 100.00mhz series : act hc49/u ( standard ) device series code go ro f (16pf) (fund') frequency tolerance (pm) @ 25oc to 99.9999mhz 1st four digits of frequency & >99.9999mhz 1st five digits of frequency operating temperature range (oc) load capacitance ( pf or series -10 ~ +60c -20 ~ +70c -40 ~ +85c 10ppm 15ppm 20ppm 25ppm ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? stability temp device height code max: go = 13. 5 mm cropped leads bd = 3 . 5 mm bc = 5 . 0 mm bb = 7 . 0 mm sa = washer fitted commodity code 854160 00 00
|
